Three Wheeler Parts

Carrier for Three Whleeler
Code No. : VSC-660001
Use : Carrier for luggauge mounted on chassis
Material : Steel sheet with pressing and welding
Finish : With rust preventive oil or red oxide layer

Carrier of Three Wheeler
Code No. : VSC-660002
Use : Carrier for passengers mounted on chassis
Material : Steel sheet with pressing and welding
Finish : With rust preventive oil or red oxide layer

Chassis of Handle Type (eco. Model)
Code No. : VSC-660003
Use : Base & mounting structur for engine & suspension in 3-wheeler
Material : Rectangular section steel pipe, steel sheet & turned links.
Finish : Coated with rust preventive oil or red oxide

Chassis of Steering Type
Code No. : VSC-660004
Use : Base & mounting structur for engine & suspension in 3-wheeler
Material : Rectangular section steel pipe, steel sheet & turned links.
Finish : Coated with rust preventive oil or red oxide

Cabin Base(floor)
Code No. : VSC-660005
Use : Rigid base for driver cabin
Material : Steel sheet with drawn reinforcement.
Finish : Coated with rust preventive oil

Silencer's Cover
Code No. : VSC -550009
Use: To cover vertical mounted silencer hole while engine is in off position. It automatically open silencer hole while engine starts.
Material : CRCA sheet fabricated by blanking, bending & welding
Finish : Golden zinc plating

Tool Box Assembly
Code No. : VSC -550002
Use : Place for storing tools in safe conditions
Material : CRCA sheet fabricated by pressing bending, welding & sanding
Finish : Spray painting or powder coating

Wheel Weight Pliers Soft Headed
Code No. : VSC -550012
Use: To remove and fix wheel weights while balancing high quality rims with tyre.
Material : Carbon steel drawn bar fabricated by piercing & welding.
Finish : White / golden zinc plating or coating with rust preventive oil.

Lever for Four Wheel Drive
Code No. : VSC - 550020
Use : For shifting power from two wheel to four wheels of tractor.
Material : Carbon steel bars and high tensile steel fabricated by turning and welding.
Finish : White / golden zinc plating

Holder for Top Link Assembly for Tractor
Code No. : VSC -550014
Use : To hold top link assembly for attaching different agriculture equipment.
Material : Rolled section of carbon steel bar & HRA sheet fabricated by piercing, bending, welding & sanding
Finish : White /golden zinc plating

Pulley Wheels (Fabricated)
Code No. : VSC -550007
Use : For smooth transmission of power by V-belt.
Material : CRCA Sheet & fine turned forging. jointed with riveting
Finish : Yellow / white zinc plating.

Radiator Top Tie
Code No. : VSC -550012
Material : Carbon steel drawn bar fabricated by piercing & welding.
Finish : White / golden zinc plating or coating with rust preventive oil.

Rocker link Assembly
Code No. : VSC - 550008
Use : For holding and attaching agriculture equipment with tractor.
Material : Carbon steel rolled plates & bushes of high carbon steel.
Finish : Primer coating
Vinod and Company

Sheet Cover for Engine Bottom
Code No. : VSC - 550019
Material : Carbon steel bar & HRA sheet fabricated by piercing, bending, welding & sanding
Finish : White / golden zinc plating

Sheet Components For Tractor

Bracket for Clutch Spring
Code No. : VSC -550005
Use : For holding clutch spring in tractor
Material : HRA sheet fabricated by pressing, bending, welding & sanding
Finish : Zinc plating with golden / white finishing or rust preventive coating

Clamp For Air Cleaner
Code No. : VSC -550003
Use : Clamping and holding air cleaner in tractor
Material : HRA sheet fabricated by pressing, bending & welding
Finish : As per order

Clamp for Radiator Hose Pipe
Code No. : VSC - 550012
Material : HRA Sheet fabricated by piercing, bending, welding & sanding
Finish : White / golden Zinc plating

Draft Link Assembly
Code No. : VSC - 550013
Material : Carbon steel bar and HRA sheet fabricated by blanking piercing turning grinding and welding.
Finish : Rust preventive oil coating.

Hand Accelerator
Code No. : VSC -550015
Use : To accelerate & keep running on desired constant speed for tractor in stand by mode.
Material : Carbon steel bar & HRA Sheet fabricated by piercing, bending, welding & sanding
Finish : White / golden zinc plating

Tractor Parts

Pedal for Accelerator
Code No. : VSC -550016
Material : Carbon steel bar & HRA sheet fabricated by piercing, bending, welding & sanding
Finish : White golden zinc plating

Triangular Plate
Code No. : VSC -550010
Use : To link between transmitting power at different angle.
Material : HRA sheet fabricated by piercing, blanking, turning, & welding
Finish : White / golden zinc plating

Wing Nut with Plastic Covering & Aluminium
Code No. : VSC - 550004
Use : For Locking purpose manually with fingers
Material : Cast iron or steel forging covered with plastic molding.
Finish : Available in different colours.

Dipstick cum Breather Assembly
Code No. : VSC-550018
Use : To check oil level of engine and facilitate breathing at different temperature conditions.
Material : Steel Forging and CRCA sheet and high quality nylon.
Finish : Zinc plated

Battery Cover with Mounting Bracket Assembly
Code No. : VSC - 550001
Use : For keeping battery in safe conditions with locking
Material : CRCA Sheet & different rolled sections of carbon steel fabricated by pressing bending, welding & sanding
Finish : Spray painting or powder coating

Bonnet Lock
Code No. : VSC-550006
Use : For holding & locking bonnet of tractor / jeep etc.
Material : CRCA sheet fabricated by pressing, bending, welding & sanding. Finish : Spray painting or powder coating.